| | |  | Tools & Home Improvement | Home » » Bosch TI18 18-Piece Titanium Twist Drill Bit Assortment with Plastic Case | | | | | | | Description: | | Bosch titanium drill bits offer the best durability and speed for general-purpose drilling applications. While the hardness of their titanium nitride coating protects the bits from chipping and cracking, the lubricity defends the bits from heat buildup--the number one cause of product failure. Bosch titanium drill bits last six times longer than black oxide bits. And their speed helix design allows them to penetrate materials three times faster than standard bits, which means extended battery life for your cordless drill. You can use the bits to drill into steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon, composite materials, and common stainless steel. The 135-degree split point starts on contact with no walking or skating, and no center punch is required. What's in the Box - 1/16-inch bit (2)
- 5/64-inch bit (2)
- 3/32-inch bit
- 7/64-inch bit (2)
- 1/8-inch bit (2)
- 9/64-inch bit
- 5/32-inch bit
- 11/64-inch bit
- 3/16-inch bit
- 7/32-inch bit
- 1/4-inch bit
- 5/16-inch bit
- 3/8-inch bit
- 1/2-inch bit
- plastic case
| | | Features: | |
• 18-piece titanium bit set for general-purpose drilling in metal, wood, and plastic
• Three times faster penetration than standard bits, extending drill battery life
• Titanium nitride coating protects bits from chipping, cracking, and heat buildup
• Plastic case and bits from 1/16-inch to 1/2-inch included
• Six times longer lasting than black oxide bits
| | | Product Details: | | | Product Length:
| 0.0 inches | | Product Width:
| 0.0 inches | | Product Height:
| 0.0 inches | | Package Length:
| 11.0 inches | | Package Width:
| 8.0 inches | | Package Height:
| 1.0 inches | | Package Weight:
| 0.5 pounds | | Average Customer Rating:
|  based on 38 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 38 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
29 of 32 found the following review helpful:
 Best basic setOct 15, 2008
By Ben
Amazon lists this set as TI118 but on the box I received was model TI18. No complaints here though, the case is slighty more rectangular but smaller. One nice feature I didnt expect were 3 hex slots on the bit holder, very convenient you can throw in a few driver bits along with the drill bits. More importantly the bits are Made in USA, to be more specific it says "Fabricated in USA of Austrian Steel". On those two points, I would recommend this set over others for the convenience and quality.
16 of 16 found the following review helpful:
great productSep 12, 2009
By Robert W. Gamble
"bobby"
I could not find my drill bits anywhere which cost $50 when purchased about 20 years ago. This set was nearly 50% less expensive for more bits and the same titanium coating. Also the new anti-skating feature is much appreciated. They cut really well. It is a good product for the price.
12 of 12 found the following review helpful:
Titanium Drill BitsNov 05, 2008
By Ronald C. Warner
A set of the finest drill bits I've used. Drill material easily that otherwise has broken another drill bit.
7 of 7 found the following review helpful:
For experienced users only! Not your dime store drill set.Nov 01, 2011
By G. Large
Outstanding set of self starting bits. I work with industrial fabrication and have to drill in all sorts of steel. This bit set lasts 10 times longer than most sets, I have not found any out there that can compare.
These drills self start without walking, and drill with almost no pressure. However that is the catch. You CANNOT press hard on these bits, they will shatter the tips. You can have hard, or you can have flexable / tough. Hard stays sharp. Tough tolerates abuse, but dulls quickly. If you use these drills, set your drill chuck to screw and set the tork to slip on the smaller bits or the drills will chip as they break through the material. If you take care of these bits they will last you. Once I learned to set the slip clutch these bits seem to last forever! Best drill bits on the market, the only brand I will use.
And as proof of how tough they are, these cut stainless. Again and again. Try that with a hardware store bit!
6 of 6 found the following review helpful:
great drill bitsSep 30, 2010
By Steve O
"Steve"
This is my second set of these drill bits and I learned on the first set to not be to aggressive with the downward force on the bits -- medium force is all you need with these bits and the extremely sharp bits will do the rest. The price was super compared to the big box home centers, delivery was on time -- what else do you want?
See all 38 customer reviews on Amazon.com
| | |
|
